The Automatic Transfer Switches ensure the power supply would automatically switch to the backup supply, during a main electrical source failure, to maintain a continuous flow of electricity.
ATS Key Description:
- Continuous monitoring of mains supply for under/over voltages,
under/over frequencies and voltage unbalances. - In the case of mains failure, a start command is sent to the
standby gen-set, after which the load is switches there. - In the case of mains returning, the load is switches back to
mains, and the standby gen-set is sent a stop command. - Manual switch is permitted and different switching intervals
are available for choosing. - ATS can work with both backup batteries and without any.